Windbreak Parts Glossary

PART NO 01 `T` PIECE UPRIGHT POLE
Used to maintain a continual linear run on the same piece of fabric

PART NO 02 `END` PIECE UPRIGHT POLE
Used to start & finish one piece of fabric, including gates

PART NO 03 `CORNER` PIECE UPRIGHT POLE
Used to make a 90 degree change of direction on the same piece of fabric

PART NO 04 `DOUBLE` GROUND PLATE
Used to join two separate pieces of fabric together or join a gate to a fabric run

PART NO 05 `SINGLE` GROUND PLATE
Used on upright poles where no joint or gate is required

PART NO 06 `GATE` SPIKE
Used where a `constant use` gate is required, sets with gates come with one `constant use` gate & one `static` gate. please specify which gates you require when ordering separately.

PART NO 07 `TOP JOINT`
Used to join two separate pieces of fabric together or join a `static`gate to a fabric run

PART NO 08 `TOP JOINT`
Used to join two separate pieces of fabric together or join a `constant use`gate to a fabric run

PART NO 09 `STATIC GATE STOP`
Used to stop the gate being opened outwards

PART NO 10 `PEG`
Used for securing the ground plates, static gate stop & support poles

PART NO 11  (DISCONTINUED)

PART NO 12  (DISCONTINUED)

PART NO 13 `HORIZONTAL POLE`
Used both bottom & top through each panel of fabric

PART NO 14 `GATE / DOG PEN HORIZONTAL POLE`
Used both bottom & top through each gate fabric & dog pen fabric adjacent to the gate

PART NO 15 VELCRO STRAP
Used to secure support poles & dog pen poles to top plastic piece on upright poles

PART NO 16 NYLON CORD STRAP
Used to secure bottom pole plastic piece to  ground plates via the pegs

PART NO 17    SINGLE PIN SUPPORT POLE
Used to support the windbreak where there is no fabric joint or gate (support poles are not required on corners)

PART NO 18    DOUBLE PIN SUPPORT POLE
Used to support the windbreak where there is a joint in the fabric or a gate (support poles are not required on corners)

PART NO 19    DOG PEN SUPPORT POLE
Used to support the dog pen across the top, so that no normal type pole is required

PART NO 20    RESERVED

PART NO 21    RESERVED

PART NO 22    GATE FABRIC (0.75 MTRS)
Replacement fabric with double stitching, colour may differ slightly  from your original 

PART NO 23    3 METRES (10 FEET) FABRIC
Replacement fabric with double stitching. colour may differ slightly  from your original 

PART NO 24    4.5 METRES (15 FEET) FABRIC
Replacement fabric with double stitching. colour may differ slightly  from your original 

PART NO 25    PLASTIC `T` (NEW STRONGER SQUARE TYPE)
New stronger design, the pole will bend, before the plastic will break

PART NO 26    PLASTIC `END` (NEW STRONGER SQUARE TYPE)
New stronger design, the pole will bend, before the plastic will break

PART NO 27    PLASTIC `CORNER` (NEW  SQUARE TYPE)
New stronger design, the pole will bend, before the plastic will break

PART NO 28    2.25 METRES DOG PEN FABRIC
Replacement fabric 1.5 panels or 2.25 mtrs in length, colour may differ slightly  from your original

PART NO 29    3.75 METRES DOG PEN FABRIC
Replacement fabric 2.5 panels or 3.75 mtrs in length, colour may differ slightly  from your original